Advanced#

Recommendations to setup an Elasticsearch cluster for production#

Elasticsearch is the fundamental persistence layer of an nJAMS instance. The demands on the Elasticsearch cluster can be very different. For example, nJAMS installer installs a single node cluster of Elasticsearch, which might be sufficient for a small environment, like a development machine.

When demands increase, the cluster will have to be dimensioned larger. Especially for production environments you should think about aspects such as availability, scalability, and performance, when planning the setup of your Elasticsearch cluster.

This chapter is about basic recommendations for setting up an Elasticsearch cluster for production.

Structure of the cluster:

In terms of reliability and scalability, the basic structure of the cluster should consist of two or more data nodes and at least three separate master nodes:

Data nodes:

Data nodes are the core nodes in an Elasticsearch cluster that do the main working tasks like indexing (storing) documents and searching for them. Therefore, scaling of Data nodes is essential for cluster performance. Data nodes need to have both sufficient disk size for storing all data and enough RAM for building internal structures for effective searching and adequate CPU for coping with processing needs.

RAM assignment must follow these rules:

Do not apply more than 31 GB to a single node
Make sure that at least twice the amount of RAM that is assigned to a Data node is available as free memory on the host. For instance, when assigning 16 GB to a node, the host machine should have at least 32 GB of RAM. The additional memory is also utilized by the Data node.

The maximum heap you can assign is 31 GB. If this is no longer sufficient, you should consider to add another node to the cluster.

The assigned heap should be related to the volume of storage. As a rule of thumb Elasticsearch recommends a ratio of 1:24 between heap and storage size. For example, if you plan a storage size of 240 GB per node, you should consider 5 GB heap for the JVM, respectively 10 GB of RAM on the host machine.

However, the RAM to storage ratio will depend a lot on your use case, query patterns and latency requirements. The ideal ratio will depend on your hardware and your index and query patterns. The only way to really know is to benchmark with realistic data and queries on the actual hardware.

For more information, see Elasticsearch reference guide about heap size.

Ingest nodes:

nJAMS itself does not use ingest nodes. But, if any third-party tools like monitoring (Kibana) requires ingest nodes, one or more of the Data notes can play this role additionally.

Master-eligible nodes:

Since it is important for cluster health to have a stable master node, the Master-eligible nodes should be separated from Data nodes and run in their own JVM.

The number of required Master-eligible nodes depends on your demand. At least 1 Master-eligible node is required per cluster. If you give high priority to reliabilty, then it is recommended to use 3 Master-eligible nodes. See Elasticsearch reference guide about avoiding split brain problem.

Master-eligible nodes require less resources than Data nodes. Nevertheless, the Master node controls the cluster state and should be provided with sufficient resources to work stressless. You can start with 2 GB heap and 1 core per Master-eligible node and monitor the load. If the load increases and resources become short, expand resources step by step.

The following formula calculates the Minimum-Master-Nodes: (master-eligible-nodes / 2) + 1

For more information, see Elasticsearch reference guide about different types of nodes.

Replicas:

Replicas increase reliability and search performance of the cluster by creating copies of data on other nodes.

For example, with having one replica configured, a single data node can have an outage while the cluster remains fully operational. A replica shard is never allocated on the same node as the original/primary shard that it was copied from.

Replicas allow you to scale out your search volume/throughput since searches can be executed on all replicas in parallel.

Replicas also enable the cluster for rolling restarts. Nodes can be restarted for maintenance one after the other, without affecting the cluster.

On the other hand, replicas require additional disk space for storing the copies.

Scaling:

The cluster should be prepared to scale. If you need more space, you can just add additional Data node(s) to the cluster.

Manage host list:

When having more than one Elasticsearch node, managing the hosts list in nJAMS’ indexer connection configuration becomes important.

Sniffing disabled:

When sniffing is disabled nJAMS uses the list of hosts for connecting into the cluster. Once the connection is established, nJAMS uses all hosts in the list for executing requests, i.e., it sends its requests to the nodes in the list in a round-robin fashion. Consequently, the list should contain all data nodes, but must not list master nodes.

Sniffing enabled:

When sniffing is enabled, the relevance of the hosts list is less important. nJAMS still uses the list for connecting into the cluster. But after that the list is no longer used. Instead the list of nodes for executing requests is build internally from the nodes found in the cluster state. Therefore, it is sufficient to list a single node in the hosts list (no matter whether data or master node), or multiple when using replicas and allowing outage for one or more hosts. Sniffing can only be used if nJAMS is able to connect directly to the data nodes. Otherwise cluster connection will fail.

To manage nodes of the host list login into nJAMS GUI as nJAMS Administrator, enter Administration > Connections > Indexer, stop Indexer, and add/remove hosts.

For more information, see Elasticsearch reference guide about sniffing.

Additional considerations:

Delaying allocation when a node leaves the cluster:

When a node leaves the cluster, Elasticsearch begins to create new replicas and rebalance shards across the remaining nodes which can put a lot of extra load on the cluster. If the missing node is expected to return soon, it might not be necessary to start rebalancing immediately. For example, it probably makes more sense to delay rebalancing for about 5 minutes.

The following option can be used for delaying rebalancing: set index.unassigned.node_left.delayed_timeout to 5m.

See Elasticsearch reference guide for more information about delayed allocation.

Avoid multiple instances of the same shard on a single host:

If you use multiple nodes on the same host, you should prevent allocation of multiple instances of the same shard on a single host.

To do so, set cluster.routing.allocation.same_shard.host to true.

See Elasticsearch reference guide for more information on this topic.

Enable shard allocation awareness:

If you want Elasticsearch to consider your physical cluster setup when allocating shards, you can use the shard allocation awareness feature. For example, if your cluster spreads about multiple data centers, you can configure Elasticsearch in a way that prevents it from allocating replicas at the same site as their primaries.

Refer to Elastisearch guide about shard allocation awareness for more information.

Recommendations for Elasticsearch in a nutshell#

Nodes:

Use dedicated master nodes!

Networking:

Avoid running Elasticsearch over WAN links between data centers
- Not officially supported by Elastic!
- Use frequent snaphots for backing up data in remote data center
- CCS/CCR is not suitable for nJAMS, it just only costs money
Try to have zero (or few) hops between nodes
If you have multiple network cards:
- separate transport and http traffic (transport on faster NIC)

Disks:

Prefer solid state disks (SSDs)
Local disk is king! In other words, avoid NFS, SMB, AWS EFS, or Azure filesystem
Elasticsearch does not need redundant storage:
- replicas = software provided HA
- local disks are better than SAN
- RAID 1/5/10 is not necessary
If you have multiple disks in the same server you can set RAID 0 or path.data
SSDs:
- Use noop or deadline scheduler in the OS ‒ for more detail, see: https://www.elastic.co/guide/en/elasticsearch/guide/current/hardware.html#_disks
- Trim your disks periodically: ‒ https://www.elastic.co/blog/is-your-elasticsearch-trimmed

Spinning disks:

are OK for warm nodes only! But don’t forget to disable concurrent merges

Server Hardware Selection:

In general, choose large machines over x-large machines (e.g., 4-8 CPU, 64GB RAM, 4*1 TB SSD)
Avoid running multiple nodes on one server (also applies to virtualization!)

RAM:

Some guidelines for configuring the heap size:
- set Xms and Xmx to the same size (bootstrap check)
- set Xmx to no more than 50% of your physical RAM
- do not exceed more than 30 GB of memory (do not exceed the compressed ordinary object pointers limit)
Leave as much memory to the filesystem cache as possible
Disable swapping

Elasticsearch Watermark evaluation in nJAMS Server#

nJAMS Server evaluates Elasticsearch’s watermark settings for stopping processing before disk-usage reaches its limits. However, the handling implemented with that version had some significant drawbacks that have been addressed in nJAMS Server 5.2.

Background:

Elasticsearch uses three watermark levels (in earlier releases just two) for responding to filling up storage.

LOW 85% Elasticsearch will not allocate shards to nodes that have more than 85% disk used.: It can also be set to an absolute byte value (like 500mb) to prevent Elasticsearch from allocating shards if less than the specified amount of space is available. This setting has no effect on the primary shards of newly-created indices but will prevent their replicas from being allocated.
HIGH 90% Elasticsearch will attempt to relocate shards away from a node whose disk usage is: above 90%. It can also be set to an absolute byte value (similarly to the low watermark) to relocate shards away from a node if it has less than the specified amount of free space. This setting affects the allocation of all shards, whether previously allocated or not.
FLOOD_STAGE 95% Elasticsearch enforces a read-only index block (index.blocks.read_only_allow_delete): on every index that has one or more shards allocated on the node, and that has at least one disk exceeding the flood stage. This setting is a last resort to prevent nodes from running out of disk space. The index block is automatically released when the disk utilization falls below the high watermark.

Note

Watermark Values: Levels can be defined using percent values, or absolute byte values. While percentage refers to disk usage, byte values refer to free-space and the meaning is somewhat inverted in that sense! Settings must not be mixed as stated by the Elastic documentation: “You cannot mix the usage of percentage values and byte values within these settings. Either all values are set to percentage values, or all are set to byte values. This enforcement is so that Elasticsearch can validate that the settings are internally consistent, ensuring that the low disk threshold is less than the high disk threshold, and the high disk threshold is less than the flood stage threshold.”

Note

Global Settings: Watermark settings are global to the cluster, i.e., they apply to all data nodes in the cluster. This needs to be considered especially when having differently sized data nodes.

Starting with release 5.2 nJAMS introduces a new watermark level STOP_LEVEL which is calculated as the midst between the HIGH and FLOOD_STAGE watermarks, e.g., with the Elasticsearch defaults this new watermark will result to 92.5% of disk-usage.

nJAMS then handles the watermark stages as follows:

LOW

This level has no meaning (no longer) for nJAMS except that it shows a warning marker (yellow triangle) on the affected node on the message processing page.

Note

Capacity Planning: When LOW watermark is reached this is an early indicator that the cluster capacity will reach its limits in the foreseeable future. The user should take this into account and start thinking about extending the cluster, or reducing amount of data.

HIGH

This level is actually already considered as error-situation that should not last for long time and that needs intervention. However, nJAMS will not react at this point and will continue normal processing, allowing the Elasticsearch’s internal mechanisms to heal this situation, i.e., to re-balance the cluster. In the best case, all nodes then fall below the LOW watermark, or at least below the HIGH watermark. nJAMS marks affected nodes with a red-triangle in that situation.

STOP_LEVEL (nJAMS only)

The stop-level is actually a part of the HIGH watermark level and directly relates to it. When HIGH watermark level persists until the STOP_LEVEL is reached, nJAMS stops processing and issues an according alert notification. nJAMS will not (automatically) resume processing until the usage falls below the HIGH watermark. That’s why HIGH and STOP_LEVEL work hand in hand. The message processing page shows a red circle on the according node as long as the usage stays above the HIGH watermark. Only when usage falls below HIGH watermark, nJAMS resumes processing and the icon changes.

FLOOD_STAGE

This level is implemented by Elasticsearch as a last resort for preventing data corruption because it cannot be written to disk. It actually should never be reached as nJAMS stops all writing to the cluster before. But when there are other applications writing to same cluster or even to the same disks, this level can be reached though.

nJAMS has no special handling for this level, but as mentioned in the above table, in this stage Elasticsearch sets all indexes to a state that prevents writing into it (index.blocks.read_only_allow_delete). But the blocking state is reflected by the client mode on the indexer client connection page:

And on the index management page, all indexes are also marked accordingly:

Note

User Intervention: This situation always needs manual interverention. To get out of this situation, the user either needs to free disk space or to add additional capacity by adding disks or additional data nodes.

Depending on the situation and Elasticsearch version, the blocks are either removed by Elasticsearch automatically when disk usage falls below the FLOOD_STAGE watermark, or they need to be removed manually.

nJAMS provides the “release write-blocks” button for that purpose.

General Remarks:

The watermark checks in nJAMS are not strictly accurate for several reasons. For example, the watermark is usually checked only once per minute, and thresholds are computed internally and might slightly differ from those calculated by Elasticsearch. Setting reasonable watermark values is essential. If at all, rebalancing can only delay running out of disk space for a certain time. The user should always observe usage and capacity and should start thinking about extension early enough.

Additional details:

Find moreinformation here: How to: Update Elasticsearch Watermarks.

Enable SSL/TLS for WildFly#

This article explains how to setup WildFly 26 to run with SSL connections only. After the changes have been implemented, both the nJAMS UI and the Wildfly management console are accessible via HTTPS, only. In order to enable SSL/HTTPS, you have to edit standalone.xml at <your-wildfly-home>/standalone/configuration/.

1. Shutdown WildFly application server, e.g. execute ./<your-njams-home>/bin/stopAll.sh. Make sure WildFly is definitely stopped. If necessary, use kill command to stop WildFly.

Modify standalone.xml
Start WildFly, e.g. execute ./<your-njams-home>/bin/startAll.sh.

With reagrds to modify standalone.xml follow these instructions accordingly:

1. Recent WildFly versions come with a default SSL configuration which, however, is disabled by nJAMS installer. To reactivate it, find element <https-listener> and set property enabled to true. Also add the ssl-context property and set it to njamsSSLContext. In addition, https-listener needs an increased value for max-post-size as indicated below in order to enable uploads of nJAMS Server update package files.

<server name="default-server">
    <http-listener name="default" socket-binding="http" enabled="false" max-post-size="209715200" redirect-socket="https" enable-http2="true"/>
    <https-listener name="https" socket-binding="https" enabled="true" max-post-size="209715200" ssl-context="njamsSSLContext" enable-http2="true"/>
    ...
</server>

Replace the existing <tls> element with the element shown below. Please note that you have to update the settings according to your environment for password (credential-reference), keystore type (implementation) and keystore location (file path):

<tls>
    <key-stores>
        <key-store name="njamsKeyStore">
            <credential-reference clear-text="njamspw"/>
            <implementation type="JKS"/>
            <file path="/opt/njams/data/njams.jks"/>
        </key-store>
    </key-stores>
    <key-managers>
        <key-manager name="njamsKeyManager" key-store="njamsKeyStore">
            <credential-reference clear-text="njamspw"/>
        </key-manager>
        <key-manager name="njamsManagementKeyManager" key-store="njamsKeyStore">
            <credential-reference clear-text="njamspw"/>
        </key-manager>
    </key-managers>
    <server-ssl-contexts>
        <server-ssl-context name="njamsSSLContext" protocols="TLSv1.2" key-manager="njamsKeyManager"/>
        <server-ssl-context name="njamsManagementSSLContext" protocols="TLSv1.2" key-manager="njamsManagementKeyManager"/>
    </server-ssl-contexts>
</tls>

Configure the management interface to use both http and https protocols.

Note

nJAMS Server internally uses the http protocol for interacting with the WildFly management interface. This communication requires the http protocol but is local only. Therefore, when configuring the management console to use SSL, we always have to allow http access from localhost also. Note that enabling https requires also the ssl-context to be set on the http-interface element:

Find the <management-interfaces> element and add the https socket binding:

<management-interfaces>
    <http-interface http-authentication-factory="management-http-authentication" ssl-context="njamsManagementSSLContext">
        <http-upgrade enabled="true" sasl-authentication-factory="management-sasl-authentication"/>
        <socket-binding http="management-http" https="management-https"/>
    </http-interface>
</management-interfaces>

4. Define bind addresses for managment and public interfaces. Change the bind address of the management interface to localhost (127.0.0.1) and that of the public interface to your host’s public IP address. In this example we specified the local ip address of the machine, where WildFly is running on, at interfaces “public” and “management”:

<interfaces>
    <interface name="management">
        <inet-address value="10.189.0.199"/>
    </interface>
    <interface name="management-localhost">
        <inet-address value="127.0.0.1"/>
    </interface>
    <interface name="public">
        <inet-address value="10.189.0.199"/>
    </interface>
</interfaces>

5. Limit socket binding to the according interfaces. Add the interface property to the socket-bindings as shown in the listing. Leave all other socket-binding entries unchanged:

<socket-binding-group name="standard-sockets" default-interface="public" port-offset="${jboss.socket.binding.port-offset:0}">
    ...
    <socket-binding name="http" interface="management" port="${jboss.http.port:8080}"/>
    <socket-binding name="https" interface="public" port="${jboss.https.port:8443}"/>
    <socket-binding name="management-http" interface="management-localhost" port="${jboss.management.http.port:9990}"/>
    <socket-binding name="management-https" interface="public" port="${jboss.management.https.port:9993}"/>
    ...
</socket-binding-group>

This step is optional and configures a redirect for http requests from port 8080 to https on port 8443.

Remove the interface property that was added in step 5 only from socket-binding named ‘http’.

<socket-binding-group name="standard-sockets" default-interface="public" port-offset="${jboss.socket.binding.port-offset:0}">
    <socket-binding name="http" port="${jboss.http.port:8080}"/>
    ...
</socket-binding-group>

Add a filter to the undertow subsystem that rewrites http requests to https and sends them to the external IP interface.

<subsystem xmlns="urn:jboss:domain:undertow:12.0" default-server="default-server" default-virtual-host="default-host" default-servlet-container="default" default-security-domain="other" statistics-enabled="${wildfly.undertow.statistics-enabled:${wildfly.statistics-enabled:false}}">
...
    <filters>
        <rewrite name="http-to-https" target="https://10.189.0.199:8443%U" redirect="true"/>
        ...
    </filters>
...
</subsystem>

Use the filter in the default server configuration by adding a reference to it.

<subsystem xmlns="urn:jboss:domain:undertow:12.0" default-server="default-server" default-virtual-host="default-host" default-servlet-container="default" default-security-domain="other" statistics-enabled="${wildfly.undertow.statistics-enabled:${wildfly.statistics-enabled:false}}">
    ...
    <server name="default-server">
        <host name="default-host" alias="localhost">
            ...
            <filter-ref name="http-to-https" predicate="equals(%p,8080)"/>
        </host>
    </server>
    ...
</subsystem>

Temporarily enable http for WildFly#

There are situations where you want to temporarily reopen http access to WildFly. For example, the nJAMS installer requires access to the WildFly via http to perform an update of an nJAMS instance. In this case, http access to the WildFly must be re-enabled for the duration of the nJAMS update.

Follow these steps to temporarily re-enable http access to WildFly:

Stop nJAMS Server. Make sure WildFly process is really stopped.
Open standalone.xml in an editor
Re-enable http for the default http-listener:

<server name="default-server">
    <http-listener name="default" socket-binding="http" enabled="true" max-post-size="209715200" redirect-socket="https" enable-http2="true"/>
    ...

Remove the filter reference in the default server configuration that rewrites http requests to https. This step is only required, if you configured to redirect http requests to https before. Just put this line into comments:

<!-- <filter-ref name="http-to-https" predicate="equals(%p,8080)"/> -->

The default server configuration would then look like this:

<server name="default-server">
    <http-listener name="default" socket-binding="http" enabled="true" max-post-size="209715200" redirect-socket="https" enable-http2="true"/>
    <https-listener name="https" socket-binding="https" enabled="true" max-post-size="209715200" ssl-context="njamsSSLContext" enable-http2="true"/>
    <host name="default-host" alias="localhost">
        <location name="/" handler="welcome-content"/>
        <filter-ref name="gzipFilter" predicate="exists('%{o,Content-Type}') and regex(pattern='(?:application/javascript|application/octet-stream|text/css|text/html|text/xml|application/json)(;.*)?', value=%{o,Content-Type}, full-match=true)"/>
        <filter-ref name="noStoreHtml" predicate="exists('%{i,Accept}') and regex(pattern='(?:text/html)(;.*)?', value=%{i,Accept}, full-match=false)"/>
        <filter-ref name="noStoreJson" predicate="path-suffix ('.json')"/>
        <!-- <filter-ref name="http-to-https" predicate="equals(%p,8080)"/> -->
        <http-invoker http-authentication-factory="application-http-authentication"/>
    </host>
</server>

Bind public interface to wildcard address 0.0.0.0 in order to allow nJAMS installer to additionally access WildFly by local address (127.0.0.1):

<interface name="public">
    <!-- <inet-address value="10.189.0.199"/> -->
    <inet-address value="0.0.0.0"/>
</interface>

Save changes in standalone.xml
Start nJAMS Server.

nJAMS UI can now be accessed via http. You can now perform the nJAMS update procedure.

Maintain internal nJAMS database#

The internal “H2” database of nJAMS Server is a lightweight, efficient and low maintenance relational database management system (RDBMS). However, from time to time it may be required to maintain nJAMS H2 database file. Especially when nJAMS Server is running continously over weeks or months, the H2 database file may increase significantly. nJAMS internal database file njams.mv.db is located at <njams-installation>/data/h2/.

Note

You should keep in view the file size of the H2 database and the available disk space.

Compacting nJAMS H2 database

Compacting nJAMS H2 database releases empty space in the database file. The H2 database is automatically compacted, when closing the database. In order to close and compact H2 database, nJAMS Server must be stopped. It is recommended to compact nJAMS H2 database periodically by performing a stop / start sequence of nJAMS Server as part of a planned downtime.

You can perform a restart of nJAMS Server by selecting Restart at Administration / System control / Deployment.

Compacting just releases unused space and does not run any optimization or reorganisation of the database. To perform a reorganization of the nJAMS database, the database has to be rebuilt.

Rebuilding nJAMS H2 database

Recreating the database reduces the database file size even further. Since recreating also rebuilds the indexes, the overall performance of the nJAMS database increases as well. To rebuild nJAMS database, the database has to be exported first. Secondly, a new database file has to be created from scratch based on the content of the exported database file.

There is an nJAMS database maintenance tool that can rebuild nJAMS H2 database. The tool is available for Linux and Windows and can be downloaded from our public repository njams-toolbox at GitHub.

How to use nJAMS Server with TIBCO EMS using SSL:#

Connect to a single TIBCO EMS instance with SSL:

This sample configuration uses a single TIBCO EMS Server secured by SSL using certificates provided by TIBCO coming with EMS installation 8.5, see <EMS_INSTALL>/8.5/samples/certs/. Have a TIBCO EMS Server instance configured using SSL.

Using JMS w/o JNDI

Copy certificates to nJAMS Server machine, e.g. into: /opt/njams/data/certs/ems

Add new JMS connection using SSL, e.g.

Property:

Value:

Name

sslJmsEMS01

JNDI

disabled

Provider URL

ssl://vswtibco01:7242

User/PW

admin/admin

Destination

njams

SSL

enabled

SSL trace

enabled

SSL debug trace

enabled

Trusted certificates

/opt/njams/data/certs/ems/server_root.cert.pem

Expected hostname

server

Add new Data Provider using SSL connection

Property:

Value:

Name

sslDP

Thread count

4

Type

LOG_MESSAGE

JMS Connection

sslJmsEMS01

Startup

LAST STATE
Start Data Provider

Connect to a fault-tolerant TIBCO EMS instance with SSL:

Property:	Value:
Name	sslJmsEMS01
JNDI	disabled
Provider URL	ssl://vswtibco01:7242
User/PW	admin/admin
Destination	njams
SSL	enabled
SSL trace	enabled
SSL debug trace	enabled
Trusted certificates	/opt/njams/data/certs/ems/server_root.cert.pem
Expected hostname	server

Property:	Value:
Name	sslDP
Thread count	4
Type	LOG_MESSAGE
JMS Connection	sslJmsEMS01
Startup	LAST STATE

This sample configuration uses a fault-tolerant TIBCO EMS Server secured by SSL using certificates provided by TIBCO coming with EMS installation 8.5, see <EMS_INSTALL>/8.5/samples/certs/. Have a TIBCO EMS Server setup running in fault-tolerant mode using SSL.

Using JMS with JNDI

Copy certificates to nJAMS Server machine, e.g. into: /opt/njams/data/certs/ems

Add JNDI connection using SSL

2.1 Login to nJAMS Server instance and go to Administration / Connection

2.2 Add new JNDI connection using SSL, e.g.:

Property:

Value:

Name

sslJndiEMS01

Provider URL

tibjmsnaming://vswtibco01:7242,tibjmsnaming://vswtibco01:7243

User/PW

admin/admin

Initial Context Factory

com.tibco.tibjms.naming.TibjmsInitialContextFactory

2.3 Add connection properties, e.g.:

Key:

Value:

com.tibco.tibjms.naming.security_protocol

ssl

com.tibco.tibjms.naming.ssl_expected_hostname

server

com.tibco.tibjms.naming.ssl_trusted_certs

/opt/njams/data/certs/ems/server_root.cert.pem

com.tibco.tibjms.naming.ssl_verify_host

false

com.tibco.tibjms.naming.ssl_verify_host_name

false

Property:	Value:
Name	sslJndiEMS01
Provider URL	tibjmsnaming://vswtibco01:7242,tibjmsnaming://vswtibco01:7243
User/PW	admin/admin
Initial Context Factory	com.tibco.tibjms.naming.TibjmsInitialContextFactory

Key:	Value:
com.tibco.tibjms.naming.security_protocol	ssl
com.tibco.tibjms.naming.ssl_expected_hostname	server
com.tibco.tibjms.naming.ssl_trusted_certs	/opt/njams/data/certs/ems/server_root.cert.pem
com.tibco.tibjms.naming.ssl_verify_host	false
com.tibco.tibjms.naming.ssl_verify_host_name	false

Add new JMS connection using SSL

Property:

Value:

Name

sslJmsEMS01

JNDI

enabled

Connection factory

FTSSLConnectionFactory

JNDI Context

sslJndiEMS01

User/PW

admin/admin

Destination

njams

SSL

enabled

SSL trace

enabled

SSL debug trace

enabled

Trusted certificates

/opt/njams/data/certs/ems/server_root.cert.pem

Expected hostname

server

Add new Data Provider using SSL connection

Property:

Value:

Name

sslFtDP

Thread count

4

Type

LOG_MESSAGE

JMS Connection

sslJmsEMS01

Startup

LAST STATE
Start Data Provider

Property:	Value:
Name	sslFtDP
Thread count	4
Type	LOG_MESSAGE
JMS Connection	sslJmsEMS01
Startup	LAST STATE

Advanced

Contents

Advanced#

Recommendations to setup an Elasticsearch cluster for production#

Recommendations for Elasticsearch in a nutshell#

Elasticsearch Watermark evaluation in nJAMS Server#

Enable SSL/TLS for WildFly#

Temporarily enable http for WildFly#

Maintain internal nJAMS database#

How to use nJAMS Server with TIBCO EMS using SSL:#